HOME / Q & A / About Mechanism / 6. The use of Oil Lubricator

● Oil leakage problem of the oil indicator

Ans.

The reasons for this oil leakage:

  1. The screws and nuts of the connection part is loosen.
  2. The oil lubrication pump’s time setting.


Solution:

  1. Check and ensure the screws and nuts are all locked tightly.
    The video for the screws and nuts tightens:
    https://www.dropbox.com/s/grjf2idn5wqesl3/Check%20and%20ensure%20the%20screws%20and%20nuts%20are%20all%20tight%20locked%20for%20CNC-350.wmv?dl=0
  2. Set the oil lubrication pump’s time properly.
    The video of setting the oil lubrication pump’s time:
    https://www.dropbox.com/s/3ala98u8419xf84/Oil%20lubrication%20setting%20for%20CNC-350.wmv?dl=0
    Instruction document: Manual about time setting
    Instruction document: Manual about panel instruction


Additional information:
The video for how to stop the lubrication pump:
https://www.dropbox.com/s/hp0rpi2bzh9q62g/stop%20the%20lubrication%20pump.wmv?dl=0