HOME / Q & A / About Mechanism / 1- Machanical & processing Questions

● CNC-350 How to adjust delay time parameter setting to let ram stop at top position

Ans:

After long year running, It’s possible the Ram             
don’t stop at top position perfectly.                
User can go to parameters as below and adjust speed delay time to let ram stop at top point.             
             
Low 1 speed (parameter #3423)    Low 2 speed (parameter #3424)         
Low 3 speed (parameter #3425)    Low 4 speed (parameter #3426)         
High 1 speed (parameter #3427)    High 2 speed (parameter #3428)         
High 3 speed (parameter #3429)    high 4  speed (parameter #3430)         
                          
(P.s Under main screen, Press parameter key, then press ”goto para” key, then key parameter NO,then enter parameter setting screen, first time enter, it need input password”520”).             
             
Refer to the video of CNC-350 How to adjust delay time parameter setting to let ram stop at top position              
https://www.dropbox.com/s/56t7vvz7x8yw89s/CNC-350%20How%20to%20adjust%20delay%20time%20parameter%20setting%20to%20let%20ram%20stop%20at%20top%20position.mp4?dl=0