HOME / Q & A / About Controller / 2-Controller problems

● How to set up finishing stop position

Ans: 

Please see video:

 

https://www.dropbox.com/s/i3hnvuhkrn82izb/How%20do%20you%20set%20up%20the%20finishing%20stop%20position.MOV?dl=0

 

  1. Press F6 first: Parameter setting
  2. Press F5: Go to Parameter again
  3. Enter the parameter number: 3418 (x axis) or 3419 (y axis)
  4. Enter the new setting value:...
  5. Enter the password after completing the entry: 520