HOME / Q & A / About Controller / 2-Controller problems

● How to set up tool back off


Please see the video below:




  1. Press F6 first: parameter setting (parameter setting)
  2. Press F5: Go to Parameter again
  3. Enter the parameter number: 3405
  4. Enter the new setting value: 1000 (this is already a property)
  5. After completing the input, enter the password: 520


We suggest that it is better to set it at 500, and 1000 has actually been reached (it should be possible at slow feed, but at extreme speed, you may observe it later)!