HOME / Q & A / About Controller / 2-Controller problems

● Why Fanuc controller is not suitable for slotting machine


Fanuc system is suitable for continuous feeding process such like milling or lathe process. However, slotting process must feed during the period of tool goes out from the hole; its process is not continuous feeding type. So, almost the general G codes can’t be used on CNC slotting m/c; except G00,G04,G90,G91. Thus, all the slotting programs must be developed by CNC slotting machine manufacture.

We have focused on researching and developing a user-friendly controller interface for our CNC slotter for over than 15 years. It offers a simple conversational programming function to generate program. User only needs to key-in the necessary data /parameters through the screen, and then press the “Generate program” key, the processing program can be generated automatically then.